Search
All Categories > Extrusion Control Systems > HG-Series 2 GRAVITROL® Weigh Hoppers > Item # HG2006  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HG2006, HG-Series 2 GRAVITROL® Weigh Hoppers


Designed for use as part of the Gravitrol® system, the HG Series 2 Weigh Hopper incorporates engineering and design breakthroughs to help achieve the optimal result in extrusion: a uniform product within tolerance at the lowest possible manufacturing cost.

The Gravitrol® system gives you total control over your monoextrusion or coextrusion processes. The system can be configured to control extruder rate by weight; layer percentages by weight; weight of extrudate by length; average thickness; and pipe or tube diameter.

The HG Series 2 Weigh Hopper is a central part of this system because it precisely monitors the amount of material consumed by the extruder. In effect, the extruder becomes a gravimetric metering device.

PCC’s HG2 mounts directly on the throat of your extruder, requiring no additional support. Standard hopper sizes control an extruder throughput at rates from 10 to 10,000 PPH. Higher-rate hoppers are available on special order.

The HG Series 2’s clear poly carbonate inspection/clean out door or sight glass allows visual inspection of hopper contents.

Each hopper is equipped with a touch screen PLC which connects to the load cell and precisely measures the extruder’s material consumption. This information is digitized on the hopper for fast, error-free and noise-immune communications with the central Gravitrol® computer. Four-point overload protection on the hopper protects the weighing system from damage due to accidental contact.

Standard Features
  • Integral loader support platform
  • Clear polycarbonate inspection/cleanout door (on 2.3 cu. ft. models and larger)
  • Inspection sightglass (on 0.3 cu. ft. and 0.6 cu. ft. models
  • Butterfly drain valve (on 2.3 cu. ft. models and larger)
  • Color touch screen control
  • Integrates with a complete Gravitrol® extrusion control system for precise, consistent throughput control
  • Mild steel construction
Options
  • Integral blender support for 2.5kg & 5kg Guardian(r) Series 2
  • High temperature design
  • Stainless steel construction
  • Special electricals
  • Positive shut-off knife-gate or swing-gate valve for gravity loading material from above
  • Integral extruder and line speed motor/control
The HG Series 2: the precise weigh hopper component of an integrated Gravitrol® system




Specifications  · Dimensions

Specifications

Working Capacity
0.6 ft³
17.0 dm³

Maximum Extruder Size
2.5 in
64 mm

Minimum Extruder Size
1.5 in
38 mm

Material of Construction

Mild Steel
Stainless Steel

Shipping Weight
75 lb
34 kg


Dimensions

Dimension A
28.3 in
719 mm

Dimension B
10.0 in
254 mm

Dimension C
11.0 in
279 mm

Dimension D
24.1 in
613 mm

Dimension E
15.7 in
400 mm

Dimension F
7.8 in
197 mm


 DOWNLOADS 

HG Series 2 Weigh Hopper
(PDF, 804KB)


Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
Process Control Corporation | Auxilary Equipment For The Plastics Processing IndustryProcess Control Corporation | Auxilary Equipment For The Plastics Processing Industry Process Control Corporation | Auxilary Equipment For The Plastics Processing Industry