Search
All Categories > Extrusion Control Systems > Item # item-1007  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # item-1007, Gravimetric Extrusion Control for X-Series Blenders





PROCESS CONTROL "X" Series blenders can be equipped with extrusion control software to allow the blender to control the extruder and line speed on mono extrusion lines for consistent output by weight. The only additional hardware needed is an B&R extruder drive control module and, if line speed is to be controlled, an B&R line speed control module.

Gravitrol® extrusion control offers the benefits of improved product quality, reduced material usage, quicker startups and product changeovers, reduced scrap, and improved product repeatability. At the same time, it reduces the operator's workload by maintaining a consistent output, regardless of screen pack or material variations.

The system uses Process Control's proven Gravitrol® software to automate the control of the line and hold the extruder output to ±0.5% by weight. This tight control of output means that product can be made consistently within tolerance at the lowest possible cost.

Process Control "X" Series blenders monitor the extruder usage in order to follow the extruder rate and insure a consistent supply of material. In an extrusion control system, this extruder rate is used to adjust the screw speed by minute amounts to hold the overall throughput to the value entered in the blender operator station.

Because the blender already has a powerful computer and equipment necessary to measure the extruder rate, adding extrusion control on a mono extrusion line with a Process Control "X" Series blender is a very cost-effective addition. This feature can be easily retrofitted to existing installations with "X" Series or "B" Series blenders.

"X" Series blenders can also be easily integrated into coextrusion applications with extrusion control for controlling product layer ratios and total line throughput. On coextrusion applications the blender computer reports to a master B&R central Gravitrol® computer, which also receives weight throughput reading from HG Weigh Hoppers mounted on single-component extruders.

Standard Features
  • B&R Color Touch Screen
  • Quick installation on new or existing lines
  • 0-10 VDC or 4-20 mA analog drive control signals
Options
  • Gravitrol® B&R Drive Speed Control Module
  • Gravitrol® B&R Line Speed Control Module
  • Special Electricals
"X" Series blender with extrusion control: Proven Gravitrol® gravimetric extrusion control and blending in one integrated, easy-to-use package.




 Specifications   

Voltage (DC)
0 to 10 V

Current
4 to 20 mA


 DOWNLOADS 

Gravimetric Extrusion
(PDF, 5607KB)


Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
Process Control Corporation | Auxilary Equipment For The Plastics Processing IndustryProcess Control Corporation | Auxilary Equipment For The Plastics Processing Industry Process Control Corporation | Auxilary Equipment For The Plastics Processing Industry