Search
All Categories > Material Handling Systems > Material Handling > RP-Series Vacuum Receiver for Dusty Material > Item # RPJG  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # RPJG, RP Series Vacuum Receiver for Dusty Material with Swing-gate Valve Discharge


The RP Series Vacuum Receiver from Process Control is part of a complete vacuum conveying system for in-plant distribution or machine/blender loading. When coupled with a vacuum pump and sequencing panel, the RP Series provides automatic loading of materials.

The RP's design accomplishes cleaning with conveying air. No plant compressed air is used for cleaning. The receiver's self-cleaning action is achieved by controlled timing of the sequencing vacuum valves. At the start of the cycle, air is drawn backward through one set of filter bags, dislodging any fines and dropping them back into the hopper. After filling, the second set of filters is back flushed. Finally, both filters are opened; the resin is delivered to its destination.

The RP Series avoids carry-over of dust back to the vacuum power unit. The filter bags in the RP Series feature large filter areas to promote low, stable pressure drop.

The RP Series Vacuum Receiver is low-maintenance. No valves come into contact with conveyed material and no tools are needed for filter cleaning or changes.

Multiple station capability is engineered into the RP Series design, allowing use of vacuum valves. PCC's RP Series is easily retrofitted to conform to your existing standard vacuum system. An optional modular control box operates valves from the existing sequencing fill signal to minimize field wiring.

Standard Features
  • Air operated sequencing valve in lid requires 80-100 psi of filtered, lubricated shop air for solenoid actuators and control cylinders. The total supply air required per cycle is 0.01 cu. ft.
  • Internal self-cleaning filter bags for granular or dusty materials
  • 24 VDC control voltage
  • Flapper-type discharge valve with magnetic switch
  • Removable lid with V-band clamp
  • Mild steel construction
Options
  • Check valve for common material line applications
  • Swing-gate or knife-gate positive shut-off discharge valve
  • 110VAC control voltage
  • Stainless steel construction
  • Load level proximity switch
  • Pre-wired junction box to simplify installation
  • High temperature design
When used in conjunction with PCC’s Vacuum Power Units, the RP Series provides processors with dependable and efficient conveying of dusty materials




Specifications  · Dimensions

Specifications

Working Capacity
1.44 ft³
40.8 dm³

Dimension G (Diameter)
16.0 in
406 mm

Control Voltage (DC)
24 V

Control Voltage (AC)
110 V

Material of Construction

Mild Steel
Stainless Steel

Shipping Weight
200 lb
91 kg


Dimensions

Dimension A
7.6 in
194 mm

Dimension B
2.0 in
2.5 in
3.0 in
3.5 in
4.0 in
51 mm
64 mm
76 mm
89 mm
102 mm

Dimension C
24.4 in
620 mm

Dimension D
51.1 in
1298 mm

Dimension E
52.7 in
1337 mm

Dimension F
1.4 in
34.2 mm

Dimension H
17.6 in
446 mm


 MORE IMAGES 

·  RP-Series Vacuum Receiver for Dusty Material - Loading Systems


 DOWNLOADS 

RP-Series Vacuum Receiver for Dusty Material - Data Sheet
(PDF, 300KB)


Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
Process Control Corporation | Auxilary Equipment For The Plastics Processing IndustryProcess Control Corporation | Auxilary Equipment For The Plastics Processing Industry Process Control Corporation | Auxilary Equipment For The Plastics Processing Industry