Search
All Categories > Material Handling Systems > Railcar Unloading > CH-Series Transfer Stations > Item # CH45_1240_  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # CH45_1240_, CH-Series Transfer Stations


Process Control Corporation specializes in equipment for bulk conveying of plastic materials. The equipment is designed to stand up to the toughest demands of your application, including high material flow rates, multiple distribution points and long conveying distances.

The CH Series transfer station, with cyclone, is designed for use in dual blower conveying systems. Used in conjunction with the VL Series vacuum pump and P series pressure pump (both available separately), the CH Series is used to transfer the material from the vacuum part of the system to the pressure part of the system. The VL pump creates the vacuum which pulls the material from a railcar or truck into the cyclone mounted on top of the transfer station. The material then drops down, through a rotary airlock feeder, into a blow through assembly. The P series then applies the pressure to convey the material to its storage point, silo or day bin. Process Control engineers are always available to assist you in designing the best system to meet your application. Process Control supplies a complete line of material handling equipment including tubing and hardware, vacuum and pressure pumps, controllers, silos and day bins.

Standard Features
  • Rotary feeder with shear eliminator and vent
  • Polyphase gear motor Power: 460V/3Ph/60Hz
  • High efficiency cyclone designed for air flow as required
  • Level control rotary vane, electromechanical type
  • Four-sided chain guard w/removable access cover
  • Reinforced heavy steel base plate
  • Mild steel construction
Options
  • Special motor
  • Special electricals
  • Epoxy coating
  • Stainless steel construction
  • Special paint
  • Baghouse type filter
The CH Series: designed for use with a dual blower conveying system




Specifications  · Dimensions  · Electrical Power Requirements

Specifications

Rotary Feeder
1.5 hp

Paint Type
Special

Finish
Epoxy Coating

Base Plate Material
Reinforced Heavy Steel

Material of Construction

Mild Steel

Shipping Weight
1837 lb
835 kg


Dimensions

Dimension A
4.5 in
114 mm

Dimension B
4.5 in
114 mm

Dimension C
4.0 in
102 mm

Dimension D
49.75 in
1264 mm

Dimension E
30.5 in
774 mm

Dimension F
132.25 in
3359 mm

Dimension G
9.41 in
239 mm

Dimension H
103.34 in
2625 mm

Dimension J
112.6 in
2860 mm


Electrical Power Requirements

Voltage
460 V

Phase
Three

Frequency
60 Hz


 DOWNLOADS 

CH-Series Transfer Stations - Data Sheet
(PDF, 104KB)


Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
Process Control Corporation | Auxilary Equipment For The Plastics Processing IndustryProcess Control Corporation | Auxilary Equipment For The Plastics Processing Industry Process Control Corporation | Auxilary Equipment For The Plastics Processing Industry