Search
All Categories > Material Handling Systems > Material Handling > RN-Series Vacuum Receiver for Pellets > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

RN-Series Vacuum Receiver for Pellets

 
Check up to five results to perform an action.

The RN Series Vacuum Receiver, from Process Control, is part of a complete vacuum conveying system for in-plant distribution or machine/blender loading. When coupled with a vacuum pump and sequencing panel (both priced separately), the RN Series provides automatic loading of pellet materials.

The RN Series Vacuum Receiver is designed to be mounted at any point where resin delivery is needed. As the station calls out for a load, a sequencing panel sends a signal to the RN to open its sequencing valve and pull vacuum on this receiver. The material is pulled from the connected source until the fill cycle is complete. Then, the material is dumped from the receiver immediately (by means of a flapper valve) or held for future use (by a positive shutoff valve).

A built-in screen prevents carry-over of pellet material back to the vacuum pump. For materials which have significant fines and dust, an optional dust collector should be purchased to reduce maintenance and protect the vacuum pump.

The RN Series Vacuum Receiver is low-maintenance: no valves come into contact with conveyed material and no tools are needed for pellet retaining screen changes.

Standard Specifications
  • Air operated sequencing valve in lid requires 80-100 psi of filtered, lubricated shop air for solenoid actuators and control cylinders. The total supply air required per cycle is 0.005 cu. ft.
  • 24 VDC control voltage
  • Load level proximity switch
  • Flapper-type valve to create a positive seal
  • Simple slide-out pellet screen with two side latches.
  • Mild steel construction
Options
  • Check valve for common material line applications
  • Swing-gate or knife-gate positive shut-off discharge valve
  • 110VAC control voltage
  • Stainless steel construction
  • Director series sequencing control panel
  • Central vacuum power unit
  • Central dust collector
  • High temperature design
The RN Series: combined with PCC's Vacuum Power Units, it is designed for dependable and efficient conveying of pellets




 DOWNLOADS 

RN-Series Vacuum Receiver for Pellets - Data Sheet
(PDF, 556KB)

Compare Items
   
  Results 1 - 16 of 16 1 

Item #

Item Name

Working Capacity

Dimension G (Diameter)

Shipping Weight
RNDF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 0.07 ft³
1.98 dm³ 		12.0 in
305 mm 		30 lb
13.5 kg
RNEF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 0.2 ft³
56.63 dm³ 		12.0 in
305 mm 		30 lb
13.5 kg
RNFF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 0.4 ft³
11.32 dm³ 		12.0 in
305 mm 		35 lb
15.8 kg
RNGF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 0.54 ft³
15.29 dm³ 		12.0 in
305 mm 		35 lb
15.8 kg
RNHF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 0.65 ft³
18.4 dm³ 		16.0 in
406 mm 		55 lb
24.9 kg
RNJF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 1.44 ft³
40.77 dm³ 		16.0 in
406 mm 		55 lb
24.9 kg
RNKF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 2.58 ft³
73.05 dm³ 		16.0 in
406 mm 		65 lb
29.4 kg
RNLF RN Series Vacuum Receiver for Pellets with Flapper Valve Discharge 3.14 ft³
88.91 dm³ 		16.0 in
406 mm 		65 lb
29.4 kg
RNDG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 0.07 ft³
1.98 dm³ 		12.0 in
305 mm 		30 lb
13.5 kg
RNEG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 0.2 ft³
56.63 dm³ 		12.0 in
305 mm 		30 lb
13.5 kg
RNFG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 0.4 ft³
11.32 dm³ 		12.0 in
305 mm 		35 lb
15.8 kg
RNGG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 0.54 ft³
15.29 dm³ 		12.0 in
305 mm 		35 lb
15.8 kg
RNHG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 0.65 ft³
18.4 dm³ 		16.0 in
406 mm 		55 lb
24.9 kg
RNJG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 1.44 ft³
40.77 dm³ 		16.0 in
406 mm 		55 lb
24.9 kg
RNKG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 2.58 ft³
73.05 dm³ 		16.0 in
406 mm 		65 lb
29.4 kg
RNLG RN Series Vacuum Receiver for Pellets Swing-gate Valve Discharge 3.14 ft³
88.91 dm³ 		16.0 in
406 mm 		65 lb
29.4 kg
  Results 1 - 16 of 16 1 
Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
Process Control Corporation | Auxilary Equipment For The Plastics Processing IndustryProcess Control Corporation | Auxilary Equipment For The Plastics Processing Industry Process Control Corporation | Auxilary Equipment For The Plastics Processing Industry