The RP Series Vacuum Receiver from Process Control is part of a complete vacuum conveying system for in-plant distribution or machine/blender loading. When coupled with a vacuum pump and sequencing panel, the RP Series provides automatic loading of materials.
The RP's design accomplishes cleaning with conveying air. No plant compressed air is used for cleaning. The receiver's self-cleaning action is achieved by controlled timing of the sequencing vacuum valves. At the start of the cycle, air is drawn backward through one set of filter bags, dislodging any fines and dropping them back into the hopper. After filling, the second set of filters is back flushed. Finally, both filters are opened; the resin is delivered to its destination.
The RP Series avoids carry-over of dust back to the vacuum power unit. The filter bags in the RP Series feature large filter areas to promote low, stable pressure drop.
The RP Series Vacuum Receiver is low-maintenance. No valves come into contact with conveyed material and no tools are needed for filter cleaning or changes.
Multiple station capability is engineered into the RP Series design, allowing use of vacuum valves. PCC's RP Series is easily retrofitted to conform to your existing standard vacuum system. An optional modular control box operates valves from the existing sequencing fill signal to minimize field wiring.
Standard Features
Air operated sequencing valve in lid requires 80-100 psi of filtered, lubricated shop air for solenoid actuators and control cylinders. The total supply air required per cycle is 0.01 cu. ft.
Internal self-cleaning filter bags for granular or dusty materials
24 VDC control voltage
Flapper-type discharge valve with magnetic switch
Removable lid with V-band clamp
Mild steel construction
Options
Check valve for common material line applications
Swing-gate or knife-gate positive shut-off discharge valve
110VAC control voltage
Stainless steel construction
Load level proximity switch
Pre-wired junction box to simplify installation
High temperature design
When used in conjunction with PCC’s Vacuum Power Units, the RP Series provides processors with dependable and efficient conveying of dusty materials