Process Control's material handling equipment is specially designed for bulk conveying of plastic materials. Years of experience with plastics processors enables Process Control engineers to size conveying equipment for reliable, cost-effective loading of gravimetric and bulk systems.

The VP Series Vacuum/Pressure Power Unit is typically used as part of a truck or railcar unloading system. It is designed to pull material to its transfer station, where it passes through a rotary feeder to the pressure side of the system. The material is then blown to storage container such as a silo or day bin. The VP Series can be part of an integrated plant distribution system designed by Process Control to meet your specific needs. Process Control supplies a complete line of material handling equipment including hardware, pumps, receivers, controllers, silos and day bins.

For higher rate requirements, separate vacuum and pressure power units are teamed with a CH Series transfer station to achieve the same function as the integrated VP Series power unit.

To ensure a continuous supply of material to any number of plant sites, Process Control Engineers work with you to select the best equipment and integrate it into a system capable of continuous operation and guaranteed performance.

Standard Features

• 20 to 50 horsepower available
• Positive displacement blower
• T-frame TEFC motor
• Enclosed V-belt drive
• Dual-stage intake filter
• Discharge silencer
• Vacuum relief valve and gauge
• Level control

• Special Paint
• Special electricals
• Fused panel disconnect
• Level controls at storage or use points
• Proofing interlocks

Process Control Corporation specializes in equipment for bulk conveying of plastic materials. Our conveying equipment is designed to stand up to the toughest demands of your application, including high material flow rates, multiple distribution points and long conveying distances.

To prevent bottle necking and ensure a continuous supply of material to any number of plant sites (silos, surge buns, processing machines, blenders, etc.), Process Control engineers work with you to select the best equipment and integrate it into a reliable system capable of continuous operation and guaranteed performance.

The VL Series Vacuum Power Unit is designed for use as part of a complete dual-blower railcar or truck unloading system.

The VL Series Vacuum Power Unit pulls material (using vacuum) from a source to a CH Series Transfer Station (available separately). Then, the material drops through a rotary feeder to a blow through powered by a P Series Pressure Power Unit (available separately). The material is then conveyed using pressure to one or many selected distribution points. The VL Series can be part of integrated materials handling system designed to meet your specific needs.

Process Control supplies a complete line of material handling equipment including tubing and hardware, vacuum pumps, controllers, bolted & welded storage silos and day bins.

Standard Features

• 10 to 50 horsepower available
• Positive displacement blower
• T-frame TEFC motor
• Dual-stage intake filter
• Discharge silencer designed for effective sound reduction
• Vacuum relief valve and gauge
• Reinforced, heavy steel base plate
• Four-sided belt guard with removable access cover
• Electricals and controls in a NEMA-12 enclosure
• Power: 460V/3PH/60Hz
• Outdoor service

• Special motors
• Special electricals
• Fused disconnect panel
• Proofing interlocks
• Level controls at storage/use points
• Special paint

Process Control Corporation specializes in equipment for conveying plastic materials. Our equipment is designed to stand up to the toughest demands of your application, including high material flow rates, multiple distribution points and long conveying distances.

To prevent bottle necking and ensure a continuous supply of material to any number of plant sites (silos, surge bins, processing machines, blenders, etc.), Process Control engineers work with you to select the best equipment and integrate it into a reliable system capable of continuous operation and guaranteed performance.

Our P Series Pressure Power Unit is designed for quiet, reliable performance in a pressure conveying system or as part of a dual-blower vacuum/ pressure system. Typical applications include railcar/ truck unloading and in-plant distribution systems. Eleven standard P Series units are available, with horsepower ratings from two to fifty.

Process Control supplies a complete line of material handling equipment including tubing and hardware, vacuum pumps, controllers, bolted & welded storage silos and day bins.

Standard Features

• 2 to 50 horsepower available
• Positive displacement blower
• T-frame motor
• Intake- and pressure-side silencer
• Reinforced, heavy steel base plate
• NEMA-12 electrical/control enclosure
• Cartridge type, intake-side air filter
• Adjustable pressure switch with diaphragm-piston transducer
• Four-sided belt guard with removable access cover

• Special motor
• Level controls at storage or use point
• Special electricals
• Special paint
• Heat exchanger for cooling conveying air.

Process Control Corporation specializes in equipment for bulk conveying of plastic materials. The equipment is designed to stand up to the toughest demands of your application, including high material flow rates, multiple distribution points and long conveying distances.

The CH Series transfer station, with cyclone, is designed for use in dual blower conveying systems. Used in conjunction with the VL Series vacuum pump and P series pressure pump (both available separately), the CH Series is used to transfer the material from the vacuum part of the system to the pressure part of the system. The VL pump creates the vacuum which pulls the material from a railcar or truck into the cyclone mounted on top of the transfer station. The material then drops down, through a rotary airlock feeder, into a blow through assembly. The P series then applies the pressure to convey the material to its storage point, silo or day bin. Process Control engineers are always available to assist you in designing the best system to meet your application. Process Control supplies a complete line of material handling equipment including tubing and hardware, vacuum and pressure pumps, controllers, silos and day bins.

Standard Features

• Rotary feeder with shear eliminator and vent
• Polyphase gear motor Power: 460V/3Ph/60Hz
• High efficiency cyclone designed for air flow as required
• Level control rotary vane, electromechanical type
• Four-sided chain guard w/removable access cover
• Reinforced heavy steel base plate
• Mild steel construction

• Special motor
• Special electricals
• Epoxy coating
• Stainless steel construction
• Special paint
• Baghouse type filter