All Categories > Material Handling Systems > Railcar Unloading > VP-Series Vacuum/Pressure Power Unit > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

VP-Series Vacuum/Pressure Power Unit

Check up to five results to perform an action.


Process Control's material handling equipment is specially designed for bulk conveying of plastic materials. Years of experience with plastics processors enables Process Control engineers to size conveying equipment for reliable, cost-effective loading of gravimetric and bulk systems.

The VP Series Vacuum/Pressure Power Unit is typically used as part of a truck or railcar unloading system. It is designed to pull material to its transfer station, where it passes through a rotary feeder to the pressure side of the system. The material is then blown to storage container such as a silo or day bin. The VP Series can be part of an integrated plant distribution system designed by Process Control to meet your specific needs. Process Control supplies a complete line of material handling equipment including hardware, pumps, receivers, controllers, silos and day bins.

For higher rate requirements, separate vacuum and pressure power units are teamed with a CH Series transfer station to achieve the same function as the integrated VP Series power unit.

To ensure a continuous supply of material to any number of plant sites, Process Control Engineers work with you to select the best equipment and integrate it into a system capable of continuous operation and guaranteed performance.

Standard Features
  • 20 to 50 horsepower available
  • Positive displacement blower
  • T-frame TEFC motor
  • Enclosed V-belt drive
  • Dual-stage intake filter
  • Discharge silencer
  • Vacuum relief valve and gauge
  • Level control
Options
  • Special Paint
  • Special electricals
  • Fused panel disconnect
  • Level controls at storage or use points
  • Proofing interlocks
The VP Series: designed for bulk unloading of plastics from trucks or railcars





 DOWNLOADS 

VP-Series Vacuum/Pressure Power Unit - Data Sheet
(PDF, 846KB)

Compare Items
   
  Results 1 - 6 of 6 1 

Item #

Motor Power

Rotary Feeder

Line Size (O.D.)

Shipping Weight

VP10D 10 hp
7.5
kW
0.75 hp
0.5
kW
2.5 in 2440 lb
1110
kg
VP15E 15 hp
11
kW
0.75 hp
0.5
kW
3 in 2665 lb
1210
kg
VP25G 25 hp
19
kW
1.0 hp
0.75
kW
4 in 2795 lb
1270
kg
VP30H 30 hp
22
kW
1.0 hp
0.75
kW
4.5 in 3390 lb
1540
kg
VP40H 40 hp
30
kW
1.5 hp
1.1
kW
4.5 in 3580 lb
1630
kg
VP50K 50 hp
37
kW
1.5 hp
1.1
kW
5.5 in 3620 lb
1645
kg
  Results 1 - 6 of 6 1 
Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions and powered by Navigator Platform
Process Control Corporation | Auxilary Equipment For The Plastics Processing IndustryProcess Control Corporation | Auxilary Equipment For The Plastics Processing Industry Process Control Corporation | Auxilary Equipment For The Plastics Processing Industry