Process Control Corporation specializes in equipment for bulk conveying of plastic materials. The equipment is designed to stand up to the toughest demands of your application, including high material flow rates, multiple distribution points and long conveying distances.

The CH Series transfer station, with cyclone, is designed for use in dual blower conveying systems. Used in conjunction with the VL Series vacuum pump and P series pressure pump (both available separately), the CH Series is used to transfer the material from the vacuum part of the system to the pressure part of the system. The VL pump creates the vacuum which pulls the material from a railcar or truck into the cyclone mounted on top of the transfer station. The material then drops down, through a rotary airlock feeder, into a blow through assembly. The P series then applies the pressure to convey the material to its storage point, silo or day bin. Process Control engineers are always available to assist you in designing the best system to meet your application. Process Control supplies a complete line of material handling equipment including tubing and hardware, vacuum and pressure pumps, controllers, silos and day bins.

Standard Features
  • Rotary feeder with shear eliminator and vent
  • Polyphase gear motor Power: 460V/3Ph/60Hz
  • High efficiency cyclone designed for air flow as required
  • Level control rotary vane, electromechanical type
  • Four-sided chain guard w/removable access cover
  • Reinforced heavy steel base plate
  • Mild steel construction
Options
  • Special motor
  • Special electricals
  • Epoxy coating
  • Stainless steel construction
  • Special paint
  • Baghouse type filter
The CH Series: designed for use with a dual blower conveying system
Unit of Measure

Specifications

Rotary Feeder

N/A 1.0 hp

Paint Type

N/A Special

Finish

N/A Epoxy Coating

Base Plate Material

N/A Reinforced Heavy Steel

Material of Construction

N/A Mild Steel

Shipping Weight

N/A 1639 lb745 kg

Dimensions

Dimension A

N/A 3.5 in89 mm

Dimension B

N/A 3.5 in89 mm

Dimension C

N/A 3.0 in76 mm

Dimension D

N/A 48.25 in1226 mm

Dimension E

N/A 26.5 in673 mm

Dimension F

N/A 123.25 in3131 mm

Dimension G

N/A 9.41 in239 mm

Dimension H

N/A 121.74 in3092 mm

Dimension J

N/A 112.72 in2863 mm

Electrical Power Requirements

Voltage

N/A 460 V

Phase

N/A Three

Frequency

N/A 60 Hz